Length and breadth of the flooring shall be measured correct to a cm and area shall be calculated in square metres correct to two places of decimal.
Length and breadth shall be measured before laying skirting, dado or wall plaster.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deduction for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 sqm.
Dry Brick Flooring
Measurement
Length and breadth shall be measured before laying skirting, dado or wall plaster.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 sqm.
The flooring done either with strips (in one operation) or without strips (in alternate panels) shall be treated as same and measured together.
CEMENT CONCRETE FLOORING WITH METALLIC HARDENER TOPPING
Measurement
Length and height shall be measured correct to a cm and its area shall be calculated in sqm correct to two places of decimals for a specified the thickness.
Length shall be measured as the finished length of skirting. Height shall be measured from the finished level of floor correct to 5 mm.
CEMENT CONCRETE PAVEMENT IN COURTYARD AND TERRACE ETC.
Measurement
Length and breadth shall be measured before laying skirting, dado or wall plaster.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 sqm.
The flooring done either with strips (in one operation) or without strips (in alternate panels) shall be treated as same and measured together.
CEMENT PLASTER IN RISERS OF STEPS, SKIRTING, DADO
Measurement
Length and height shall be measured correct to a cm and its area shall be calculated in sqm correct to two places of decimals for a specified the thickness.
Length shall be measured as the finished length of skirting. Height shall be measured from the finished level of floor correct to 5 mm.
CEMENT CONCRETE FLOORING
Measurement
Length and breadth shall be measured before laying skirting, dado or wall plaster.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 sqm.
The flooring done either with strips (in one operation) or without strips (in alternate panels) shall be treated as same and measured together.
TERRAZO (MARBLE CHIPS) FLOORING LAID IN SITU
Measurement
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster. The area as laid shall be calculated in sqm correct to two decimal places.
The thickness of the under layer shall be measured correct to a cm. The thickness of top layer shall not be less than that specified.
No deduction shall be made, nor extra paid for voids not exceeding 0.20 square metre.
Deduction for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre. Nothing extra shall be paid for laying the floor at different levels in the same room or courtyard.
Terrazo (Marble Chips) flooring laid as floor borders, margins and similar bands upto 30 cm width and on staircase treads shall be measured under the item of terrazo flooring but extra shall be paid for such work. This extra in the case of staircase treads shall include the cost of forming the nosing also. However, moulded nosing shall be paid for staircase treads etc. extra in running metres except where otherwise stated, returned moulded ends and angles to mouldings shall be included in the description. Extra shall also be paid for laying flooring in narrow bands not exceeding 7.5 cm in width and such bands shall be measured in running metres for this purpose.
Dividing strips inserted in terrazo to form bays, patterns shall be described stating the materials, its width and thickness and measured in running metres.
Special surface finishes to treads, risers and the ends of concrete steps and the like shall be measured separately and given in square metres and shall include form work, if required.
TERRAZO (MARBLE CHIPS) SKIRTING IN SITU
Measurements
Length and height shall be measured correct to a cm and its area shall be calculated in sqm correct to two places of decimal.
Length shall be measured as finished length of skirting.
Height shall be measured from the finished level of floor correct to 5 mm where the height of skirting does not exceed 30 cm and when the height exceeds 30 cm it shall be measured correct to a cm.
WAX POLISHING
Measurements
Length and breadth shall be measured correct to a cm and its area shall be calculated in sqm correct to two places of decimal.
CRAZY MARBLE FLOORING
Measurements
Length and breadth shall be measured correct to a cm before skirting, dado or wall plaster and it shall be calculated in sqm correct to two decimal places.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying floor at different levels in the same room or courtyards.
TERRAZO TILE FLOORING
Measurements
Terrazo tiles flooring with tiles manufactured from ordinary grey cement without pigment and coloured terrazo tile flooring shall be measured separately according to “TERRAZO (MARBLE CHIPS) FLOORING LAID IN SITU” Terrazo tile flooring shall be measured as laid in square metre correct to two places of decimal.
For length and breadth dimensions correct to a cm before laying skirting, dado or wall plaster shall be taken.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre. Nothing extra shall be paid for use of cut tiles nor for laying the floor at different levels in the same room or courtyard.
Terrazo tile flooring laid in floor borders and similar band shall be measured under the item of terrazo tile flooring. Nothing extra shall be paid in respect of these and similar bands formed of half size or multiplies of half size standard tiles or other uncut tiles.
Treads of stairs and steps paved with tiles without nosing, shall also be measured under flooring. Moulded nosing shall be paid in running metre except where otherwise stated, returned moulded ends and angles to mouldings shall be included in the description. Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
TERRAZO TILES IN RISERS OF STEPS, SKIRTING AND DADO
Measurements
The thickness of the skirting shall be as stated. Length shall be measured along the finished face of riser, skirting or dado correct to a cm. Height shall be measured from the finished level of tread or floor to the top (the underside of tread in the case of steps).
This shall be measured correct to 5 mm in case of risers and skirting (not exceeding 30 cm in height).
In case of heights more than 30 cm, as in the case of dado and on walls, the height shall be measured correct to a cm and such work shall be paid for separately. The area shall be calculated in square metre, correct to two places of decimal.
Where the height of risers, skirting or dado does not admit of full size or other finished size tiles and the tiles are to be cut (sawn), nothing extra shall be paid for the same.
CHEQUERED TILE FLOORING
Measurement
Terrazo tiles flooring with tiles manufactured from ordinary grey cement without pigment and coloured terrazo tile flooring shall be measured separately according to “TERRAZO (MARBLE CHIPS) FLOORING LAID IN SITU” Terrazo tile flooring shall be measured as laid in square metre correct to two places of decimal.
For length and breadth dimensions correct to a cm before laying skirting, dado or wall plaster shall be taken.
No deduction shall be made nor extra paid for voids not exceeding 0.20 sqm.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre. Nothing extra shall be paid for use of cut tiles nor for laying the floor at different levels in the same room or courtyard.
Terrazo tile flooring laid in floor borders and similar band shall be measured under the item of terrazo tile flooring. Nothing extra shall be paid in respect of these and similar bands formed of half size or multiplies of half size standard tiles or other uncut tiles.
Treads of stairs and steps paved with tiles without nosing, shall also be measured under flooring. Moulded nosing shall be paid in running metre except where otherwise stated, returned moulded ends and angles to mouldings shall be included in the description. Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
CHEQUERED TILES IN STAIR TREADS
Measurements
Chequred tiles on stair treads shall be measured in square metre correct to two places of decimal.
Length shall be measured correct to a cm before laying skirting, dado or wall plaster.
Width shall be measured correct to a cm from the outer edge of the nosing, as laid, before providing the riser.
In the case of the edge tiles of the landing and wide steps, width shall be measured upto the near edge of the chequered stair tread tiles.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
ACID OR ALKALI RESISTANT TILES
Measurements
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster and the area calculated in square metre correct to two places of decimal.
Where coves are used at the junctions, the length and breadth shall be measured between the lower edges of the coves.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Areas, where glazed tiles or different types of decorative tiles are used will be measured separately.
PRESSED CERAMIC TILE FLOORING
Measurements
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster and the area calculated in square metre correct to two places of decimal.
Where coves are used at the junctions, the length and breadth shall be measured between the lower edges of the coves.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Areas, where glazed tiles or different types of decorative tiles are used will be measured separately.
FIXING OF TILE FLOORING WITH CEMENT BASED HIGH POLYMER MODIFIED QUICK SET ADHESIVE (WATER BASED)
Measurements
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster and the area calculated in square metre correct to two places of decimal.
Where coves are used at the junctions, the length and breadth shall be measured between the lower edges of the coves.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Areas, where glazed tiles or different types of decorative tiles are used will be measured separately.
MARBLE STONE FLOORING
Measurements
Marble stone flooring with different kind of marble shall be measured separately and in square metre correct to two places of decimal.
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster.
In the case of radially dressed or circular stone used in the work, the dimensions of the circumscribing rectangle of the dressed stone, shall be measured correct to a centimeter.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying the floor at different levels in the same room.
Steps and treads of stairs paved with marble stone slabs shall also be measured under the item of Marble Stone flooring.
Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
Nosing for treads shall be measured in running metre and paid for extra. The width of treads shall be measured from the outer edge of the nosing, as laid, before providing the riser.
MARBLE STONE IN RISERS OF STEPS AND SKIRTING
Measurements
Length shall be measured along the finished face of riser or skirting, correct to a cm. Height shall be measured from the finished level of tread or floor, to the top (the underside of tread, in the case of steps) correct to 0.5 cm. The areas shall be calculated in square metre correct to two places of decimal.
Dado and lining of pillars etc. shall be measured as ‘Marble work in wall lining. If the thickness is upto 25 mm or as “Marble Work” in Jambs, walls, columns and other plain work’ if the thickness is more.
KOTA STONE FLOORING
Measurements
Marble stone flooring with different kind of marble shall be measured separately and in square metre correct to two places of decimal.
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster.
In the case of radially dressed or circular stone used in the work, the dimensions of the circumscribing rectangle of the dressed stone, shall be measured correct to a centimeter.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying the floor at different levels in the same room.
Steps and treads of stairs paved with marble stone slabs shall also be measured under the item of Marble Stone flooring.
Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
Nosing for treads shall be measured in running metre and paid for extra. The width of treads shall be measured from the outer edge of the nosing, as laid, before providing the riser.
KOTA STONE IN RISERS OF STEPS, SKIRTING AND DADO
Measurements
Length shall be measured along the finished face of riser, skirting or dado correct to a cm. Height shall be measured from the finished level of tread of floor to the top (the underside of tread in the case of steps).
This shall be measured correct to a mm in the case of risers of steps and skirting and correct to a cm in the case of dado. The area shall be calculated in square metre correct to two places of decimal.
Lining of pillars etc. shall also be measured under this item.
RED OR WHITE FINE DRESSED SAND STONE FLOORING
Measurements
Marble stone flooring with different kind of marble shall be measured separately and in square metre correct to two places of decimal.
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster.
In the case of radially dressed or circular stone used in the work, the dimensions of the circumscribing rectangle of the dressed stone, shall be measured correct to a centimeter.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying the floor at different levels in the same room.
Steps and treads of stairs paved with marble stone slabs shall also be measured under the item of Marble Stone flooring.
Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
Nosing for treads shall be measured in running metre and paid for extra. The width of treads shall be measured from the outer edge of the nosing, as laid, before providing the riser.
RED OR WHITE FINE DRESSED AND RUBBED SAND STONE FLOORING
Measurements
Length and breadth of superficial area of the finished work shall be measured correct to a cm. The area shall be calculated in square metre correct to two places of decimal.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
WOOD BLOCK FLOORING
Measurements
Length and breadth of superficial areas of the finished work shall be measured correct to a cm. The area shall be calculated in square metre correct to two places of decimal.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
TURF PAVER
Measurements
Length and breadth correct to a cm of Turf paver surface shall be measured and area shall be calculated in sqm correct to two places of decimal.
BORDER TILES
Measurement
The length of border tile shall be measured in running metre correct upto a cm.
EPOXY BASED GROUTING FOR TILES
Measurement
Length and breadth of grouted tile area shall be measured correct to a cm and the area shall be calculated in sqm correct to two places of decimal.
ITALIAN MARBLE STONE FLOORING
Measurement
Marble stone flooring with different kind of marble shall be measured separately and in square metre correct to two places of decimal.
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster.
In the case of radially dressed or circular stone used in the work, the dimensions of the circumscribing rectangle of the dressed stone, shall be measured correct to a centimeter.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying the floor at different levels in the same room.
Steps and treads of stairs paved with marble stone slabs shall also be measured under the item of Marble Stone flooring.
Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
Nosing for treads shall be measured in running metre and paid for extra. The width of treads shall be measured from the outer edge of the nosing, as laid, before providing the riser.
FLAMED FINISH GRANITE STONE FLOORING
Measurement
Marble stone flooring with different kind of marble shall be measured separately and in square metre correct to two places of decimal.
Length and breadth shall be measured correct to a cm before laying skirting, dado or wall plaster.
In the case of radially dressed or circular stone used in the work, the dimensions of the circumscribing rectangle of the dressed stone, shall be measured correct to a centimeter.
No deduction shall be made nor extra paid for voids not exceeding 0.20 square metre.
Deductions for ends of dissimilar materials or other articles embedded shall not be made for areas not exceeding 0.10 square metre.
Nothing extra shall be paid for laying the floor at different levels in the same room.
Steps and treads of stairs paved with marble stone slabs shall also be measured under the item of Marble Stone flooring.
Extra shall, however, be paid for such areas where the width of treads does not exceed 30 cm.
Nosing for treads shall be measured in running metre and paid for extra. The width of treads shall be measured from the outer edge of the nosing, as laid, before providing the riser.
